Electronic Universal Testing Machine UTM

Application

Universal testing machine is used to test tension, compression, shearing force, adhesion, peeling force, tear strength,ect of specimen, semi product and finished product in the field of rubber, plastic, metal, nylon,fabric,paper, aviation, packing, architecture, petrochemistry, electric appliance, automobile,...etc. which are the basic facilities for input quality control (I.Q.C), Quality Control (Q.C.), Physical Inspection,Mechanics Research and Material Development.

Features of universal testing machine

♣ Adopting windows platform, and all the parameter settings can be processed in the dialog box, and it operates easily.

♣ Using a single-screen operation; do not need to switch the screen;

♣ With three languages in Simplified Chinese, Traditional Chinese and English, the software interface can be switched easily;

♣ The pattern of Test reports can be selfdesignated; test data can be displayed directly in the main screen;

♣ Choosing translational, comparative mode at the same time to make a number of curve data comparison

♣ With a variety of measurement units, Measure In Imperial & Metric are switchable;

♣ With self-return & auto-correction function;

♣ With automatic magnification function, in order to achieve the most appropriate size of the graphics;

♣ With the user-defined Test methods; with experimental data analysis function;

Standard of universal testing machine

♠ ASTMD903

♠ GB/T16491

♠ GB/T1040

♠ CNS- 11888

♠ GB/T8808

♠ GB13022

♠ JIS K6854

♠ GB/T 2790/2791/2792

♠ PSTC-7

Technical Parameters of universal testing machine

Specification of main engine:

♥ Motor system: Panasonic servo motor +Panasonic servo driver +ball screw (Taiwan)+Leeming reduction gears + synchronous belt drive

♥ Data transmission:RS232

♥ Computer servo system :Desktop computer servo control tensile tester dedicated system

♥ Whole displacement: encoder (2500P/R), ascending 4 times precision

♥. Display modes: Windows Interface display

♥. Displacement resolution: 0.001mm

♥. Using windows interface to test software it can achieve to set speed, load, power time, Breakpoint proportion,much order control mode and meet different test requirement.

♥. Safety device: ♦overload emergency stop device,

♦fluctuation travel limit device,

♦leakage automatic broken electricity system,

♦automatic breakpoint stop function

Software: 

The TM2101 measurement and control system is designed purposely for microcomputer controlled electronic universal testing machine, microcomputer controlled universal hydraulic testing machine and microcomputer controlled compress testing machine, used for tension, compress, bend, shear, tearing andpeel test. With the personal computer and interface plate, it could collect, save, process and print test result. Further it can calculate multiple parameters, i.e. maximum force, yield strength, average peel force maximum deformation, yielding point and elastic modulus; this system is featured in curve process, multi-sensor support, image interface, flexible data process and powerful system function.